First slide

Tel:+86 17303821432|Email:info@coffee-popcorn-machine.com First slide First slide

The usage method of popcorn machine

Popcorn is everyone’s favorite snack, whether in the cinema, the street, children, adults and so on will hold a popcorn, satisfied with the taste of popcorn. Now, many families will also buy a popcorn machine, convenient to eat popcorn at home, but many people do not know how to use the popcorn machine.

Electromagnetic ball popcorn machine is a special machine used to make popcorn. There are old-fashioned artillery hand rocker popcorn machine, Electromagnetic ball popcorn machine, corn puffing machine , Electric ball popcorn machine, small commercial popcorn machine. The popcorn machine was used long ago. Scientists discovered the remains of popcorn and corn cobs about 3,000 to 6,700 years ago on Peru’s northern coast, proving that cornmeal and popcorn were once the main food for the ancestors of humans living there.

First of all, before using the electromagnetic ball popcorn machine, we have to check whether the machine is working properly, such as turning on the switch indicator light is normally on. If it is not lit, it will prove that the machine is defective. We should stop using it. If the light is working properly, we put a little corn in and twist the switch to heat it. It’s a preheating process, and when it pops, it proves it’s ready. Then we began the formal operation.

 

Step 1: Connect the gas bottle of the electromagnetic ball popcorn machine, turn on the heating switch, put in 50 grams of peanut oil, press the rotary switch, preheat for 3 minutes, then turn off the switch, pour out the peanut oil. (according to this operation, the service life of the pot is increased by more than two times).

 

Step 2: turn on the function switch (heating switch, rotary switch), and then add 50-60 grams of popcorn butter (or coconut oil, color fruit butter, butter), 100 grams of popcorn. (the pot must be preheated for 3 minutes), then put the popcorn white sugar 60 – 70 grams. Then put down the lid.

 

Step 3: Operators should pay attention to the situation of popcorn, such as popping sound becomes smaller, a large number of popcorn popping, immediately turn off the heating switch, and then continue to rotate 3 to 5 bills clock, immediately out.

 

Step 4: Clean the bottom of the pot and wipe it clean with a semi-wet towel. (If the bottom of the pot is scorched, add 150 ml of boiling water immediately, the water can submerge the bottom of the pot, and then heat and rotate for about 10 minutes.) Make it clean before bursting the second pot.

Step 5: after the electromagnetic ball popcorn machine, is stopped, keep the machine clean  no oil stains and no water marks. Turn off the function switch.

 

    ×

    Get a Quote

    Your requirements has been submitted.
    Something went wrong. Please try again